Scope

Honey Gold Smooth Wall Filling is ideal for filling, cracks, holes and gaps in plaster, wood and other building material. It forms an ideal base to give a durable, long lasting and smooth finish for emulsion & enamels.

Uses

Honey Gold Smooth Wall Filling is ready to use filler that is used on all types of interior masonry surfaces. It provides a smooth base for the application of all decorative products.

Surface Preparation

New ,bare, old or previously painted surfaces must be clean, dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper .Brush down previously painted surface completely and make the surface smooth. For large holes and cracks ,use plaster of paris or white cement .Allow to dry. Apply brighto super sealer in order to seal the surface from water and salts. Allow surface to dry completely. Then apply Honey Gold Smooth Wall Filling.

Application Procedure

Putty applicator

Dry Time

Depends on temperature, humidity, air movements and film thickness Touch Dry :2 – 3 Hours Recoat :6 – 8 Hours

Coverage

A guide to the practical coverage which can be achieved under normal conditions is 6 – 10 m2 /Ltr. /coat.

Packing Size

This product is available on 5 kilo and 20 kilo packings.

Important

Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments