Loading...

Loading...

Honey Gold Metallic Finish

Scope

Honey Gold Metallic Finish is an excellent quality paint suitable for use on all types of wood & metal surfaces, It gives smooth and lustrous finish. It gives protection against water, rust, heat and dust etc.

Uses

Honey Gold Metallic Finish is used on all types of interior and exterior wood and metal surfaces.

Surface Preparation

New or previously painted surfaces must be clean, dry and free from grease, rust, dust etc. Rub down the surface with the help of abrasive paper. Apply Honey Gold red oxide primer in order to prevent the surfaces from rust. When dry, rub down the surfaces with abrasive paper. Apply Honey Gold synthetic undercoat on the surfaces. After drying, rub down with the help of abrasive paper again. Apply Honey Gold synthetic metallic enamel. Stir thoroughly before use..

Application Procedure

With Spray

Drying Time

Depends on temperature, humidity, air movements and film thickness Touch Dry : 3 - 5 Hours Hard Dry (Recoat): 16 – 18 Hours

Coverage

A guide to the practical coverage which can be achieved under normal conditions is 15 – 17 m2 /ltr. /coat.

Packing Size

This Product is available in 1 Litre and 4 Litre

Important

Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments

Image Gallery