Loading...

Loading...

Honey Gold Silk Matt Emulsion

Scope

Honey Gold Silk Matt Finish is a Low VOC interior premium emulsion paint specially formulated to repel stains like ketchup, tea, coffee, juice, ink and hand prints etc. Stains can be removed without damaging the paint. It is a top quality emulsion paint offering higher hiding and maximum protection on masonry surfaces including brick work, plaster, cement and wall boards etc.

Uses

Suitable for all interior Walls & Ceillings

Surface Preparation

New or Bare Surface

New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using suitable abrasivve paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae & moss with bleach. After priming new surface with Honey Gold Primer, fill the surface with Honey Gold Wall Putty, Please refer to PDS for correct application

Previously Painted Sound Surfaces

Remove all lose, defective or poorly adhering material by rubbing down using suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as described above if required.

Powdery, Dusty and Cracked Surfaces:

Make good minor defects. For larger holes and cracks, use sand and cement mixture. Allow the surface to dry, Prepare surface as described above.

Silk Matt Emulsion Application:

After surface preparation apply 3-4 coats of Honey Gold Silk Matt Emulsion. Ensure 3-4 hours for drying between successive coats.

Use of any other paint apart from specially formulated Honey Gold Silk Matt Emulsion may deviated the desire finish of Honey Gold Silk Matt Emulsion and make it hard to recondition STIR THOROUGHLY BEFORE USE

Contains no added lead or mercury.

Application Procedure

Application Method: Spray( Airless or conventional ), Bursh, Roller. Thinner/Cleaner: Water

Application Procedure (For Dark Shades)

Use Roller Only

Drying Time

Temperature: 25C-35C Dry to touch: Touch Dry : 4-6 hours. Dry to handle:16 hours. Recoating Time: 16 hours.

Coverage

16-18 m2/L/Coat

Packing Size

This Product is available in 1 Litres 4 Litres and 16 Litres packs.

Important

Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments