Loading...

Loading...

Honey Gold Synthetic Enamel

Scope

Honey Gold Synthetic Enamel is designed for use on interior and exterior wood and metal surface. It is a superior quality high gloss enamel especially designed to give high gloss retention and scrub resistance. With a wide range of trendy shades, Honey Gold Synthetic Enamel is an ideal choice for wood and metal surface.

Uses

Suitable for all interior and exterior surfaces like wood, metal iron etc..

Surface Preparation

New, bare, old or previously painted surface must be clean dry, free from wax and dust. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surfaces and dust off.

Application Procedure

Application Method: Spray (airless or conventional), Brush, Roller.

Thinner / Cleaner: Thinner

Drying Time

Temperature: 25 °C - 35 °C

Dry to touch: Touch Dry : 4-6 hours.

Dry to handle:16 hours.

Recoating Time: 16 hours.

Coverage

12-14 m per liter per coat.

Packing Size

This Product is available in 250 ML 1 Litres and 4 Litres packs.

Important

Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments

DIRECTION FOR USE

Stir well before use. Application can be done by brush, roller or spray. Thin (by volume) up to 10-15 % with kerosene oil or mineral turpentine oil for brush or roller application, 20-25 % for conventional air spray. Clean up all equipment with kerosene oil or mineral turpentine oil immediately after use.

SAFETY, HEALTH AND ENVIRONMENTAL INFORMATION

Keep away from source of ignition fire. Highly flammable Harmful by inhalation and if swallowed Keep out of the reach of children away from food and drink Ensure good ventilation during application and drying. Do not breathe in vapor or sanding dust. Avoid contact with eyes and skin. When applying paint, it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advise. Wear protective clothing and mask while applying the paint. Use soap and water to clean the splashes from skin. Paint must away be stored in a coat and dry place. Care must be taken while transporting the paint. Always keep container in a secure upright position. Use sand to contain any spillage. Dispose off paint in accordance with the appropriate Environmental Quality Regulations. Do not discharge into drain or environment. Dose not contain any added Lead, Mercury, Chromium and Cadmium compounds. Chemical Safety data sheet available on required.

Image Gallery