Honey Gold Texture Finish


Honey Gold Texture Finish is a top quality water based paste. Honey Gold Texture Finish is used to produce different kinds of decorative, eye catching remarkable and textural effects.


Suitable for exterior & interior use on concrete, gupsum. brick, asbestos etc.

Surface Preparation

New surface must be clean, dry and free from dust, wax, salts and all unwanted material. Remove all defective and poorly adhering material of previously painted Surfaces by rubbing down using abrasive paper and dust off. For large holes and cracks. Use plaster of paris or white cement. Allow to dry. Apply 1-2 coats of brighto super sealer or exterior primer for proper sealing from water & salts and allow to dry. Apply 1-2 coats of Honey Gold filler or exterior filler and allow to dry. Rub down the surface with abrasive paper and dust off. Apply Honey Gold Texture Finish with roller. Apply designing roller to create the desired textured look. Apply one to two coats of Honey Gold paint’s product of your choice.

Application Procedure

With Roller

Drying Time

Depends on temperature, humidity, air movements and film thickness Touch Dry:3-4 Hours Over coating with Topcoat:12 – 15 Hours


A guide to the practical coverage which can be achieved under normal conditions is 4 – 5 m2 /Lrt. /coat

Packing Size

This Product is available in 4 Litres And 16 Litres


Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments

Image Gallery