Loading...

Loading...

Honey Gold Super Water Primer

Scope

Honey Gold Super Water Primer is a water based wall sealer which protects against alkali and moisture. It is breathable primer which allows water vapors to evaporate. It is a top quality primer for use on masonry surfaces including concrete, brick work, plaster, cement and wall boards etc.

Uses

Suitable for all interior Walls & Ceillings

Surface Preparation

New or Bare Surface

Surfaces must be clean, dry and free from efflorescent salts. After priming with Honey Gold Super Water Primer, fill surface with a mixture of 4 parts chalk, 1 part lithopone and 3-4 parts Honey Gold Super Water Primer on to give it paste like consistency. Allow the filler to dry overnight.

Previously Painted Sound Surfaces

Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off. Spot primer and filler surface as described above.

Make good minor defects. For large holes and cracks use sand and cement mixture. Allow to dry. Prime surface and then fill any surface imperfections with the filler described above. Allow to dry overnight. Scuff surface using abrasive paper and dust off.

Drying Time

Temperature: 25C-35C Dry to touch: Touch Dry : 15 Minutes. Dry to handle:45-60 Minutes

Coverage

15 - 17 sq.m per liter per coat.

Packing Size

This Product is available in 1 Litres 4 Litres and 16 Litres packs.

Important

Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments