Loading...

Loading...

Honey Gold Weather Shine Exterior Putty

Scope

Brighto wall shield is an acrylic based paint which is used for exterior surfaces. Brighto wall shield gives protection and dirt pick up resistance to surfaces.It is used for new or previously painted surfaces such as brick work,plaster,concrete,wall boards,gypsum etc. Brighto wall shield provides elastic and weather resistant coating.

Uses

Suitable for exterior use on concrete, gupsum. brick, asbestos etc.

Surface Preparation

New,bare,old or previously painted surfaces must be clean ,dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper.Brush down previously painted surface completely and make the surface smooth .For large holes and cracks use plaster of paris or white cement. Allow to dry. Apply brighto exterior primer in order to seal the surface from water and salts. Allow the surface to dry completely then apply brighto exterior filler and allow to dry.Rub down the surface with abrasive paper and dust off. Now the surface will be ready for brighto wall shield application. Stir the paint thoroughly before use.

Application Procedure

Application Method: Spray (airless or conventional), Brush, Roller.

New or bare surfaces must be clean, dry and free from salts. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. Treat any area affected by mould lichens, algae or moss with bleach. After priming new surfaces with honey gold primer fill the surface with honey gold wall filling. Third coat is recomended

Application Procedure (For Dark Shades)

Use Roller Only

Drying Time

2-3 hour interval between coats.

Coverage

One litre covers approximately 12-16 sq. meter per coat. Coverage may vary depending on nature of surface, application technique and film thickness applied.

Packing Size

This Product is available in 20 KG pack.

Important

Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments

Image Gallery